The Riding Gravel Forum
Register Calendar Latest Topics Chat
 
 
 


Reply
  Author   Comment  
cooldogcaboose

Starter
Registered:
Posts: 6
Reply with quote  #1 
Has anyone built with Ican GRAVEL BIKE FRAME GRA02?  
http://www.icanbikes.com/html/Cross_Country/266.html
0
ReverendWrong

Starter
Registered:
Posts: 12
Reply with quote  #2 
A very striking resemblance to my Jamis Renegade Elite.
0
sully

Member
Registered:
Posts: 35
Reply with quote  #3 
Quote:
Originally Posted by ReverendWrong
A very striking resemblance to my Jamis Renegade Elite.


Geometry chart doesn't match though.
0
kcikram

Starter
Registered:
Posts: 2
Reply with quote  #4 
Still in process.  Received the frame 2 days ago.  Didn't have a long enough rear brake hose so I ordered and should finish on Monday.  Here are the details:
Size: 58CM
BB: BSA (had to special order because their stock is BB86 and I wanted  consistency with my road bike)
Wheels: ICAN 38C 25mm wide w/ Novatech hubs
Tires: Clement Xplor MSO 40mm w/tubes (plenty of clearance and probably put narrower tires when the snow goes away)
Groupset: Ultegra 6800 52/36 and 11-28
HB: FSA Gossamer and SL-K Stem
Saddle: Nashbar EXP 1(these things are awesome for the price)

Still need to cut steerer tube, install brake hose, bar tape and bleed brakes.

Weight: 19.2 lbs w/o pedals.

I custom ordered the paint job based on some pics I found on the internet and then later I realized it looks a lot like the current Canyon Endurace CF SLX 8.0.  Totally not intended on my part.  I was looking for  Stack/Reach ratio >=1.5;  ICAN GR02 S/R = 1.56

I plan on using this as a winter bike and gravel riding.20180106_150230.jpg


0
sissypants

Starter
Registered:
Posts: 2
Reply with quote  #5 
Thanks for sharing your info on this bike! You seem to be the only guy on the interwebs that has posted about the GRA02. This frame seems to be dwarfed by the Carbonda CFR505. Any updates, pics, and ride impressions?

What axle pitch did you use, I'm looking for a good lightweight axle. How long did your rear brake cable have to be?  I have a 58cm frame on order, working on a top-notch build. I'll post up on MTBR, Chinertown, and this forum once I get a chance to build it in, ride it, and get some solid impressions. ICAN has been a pleasure to work with.
0
kcikram

Starter
Registered:
Posts: 2
Reply with quote  #6 
Follow up post on the ICAN GRA02.  So far I've put about 400 miles on the bike in both gravel mode and road mode.  During the early spring when my road group pace isn't so fast I put 28c road tires on and took it out on road rides.  Longest ride was 60ish miles.  Loved every minute of it.  It is very comfortable (especially with the 28c tires) and fast enough to keep up with the group.  I still pull it out for rainy weather and slower recovery rides. 

In gravel mode I put on 35c Schwalbe gravel tires and take it on our forest path trails.  Keep in mind this is just crushed limestone stuff and you could realistically ride on road tires but in some areas there are numerous twist and turns so some knobs on the side help.  It rides and handles great.  I previously used a cross bike with a much more aggressive geometry and this handles almost as well on the turns but is smoother with the longer wheelbase.

The frame and fork have been solid and I have nothing to complain about.  Only thing to mention is that the chainstays bulge out a bit and I tend to strike the heel of my shoe on the right chainstay.  I also do this on my road bike so it isn't totally the GRA02's fault but I do it more often on this bike.  I also have size 12 shoes.

Changes to build since last post:
Shimano R8000 52/34 crank/chainrings (yes I replaced the 36 with a 34)
Shimano R8000 front derailleur
Shimano R8000 long cage derailleur is going on soon so I can accommodate a 30+ cassette since I plan to take this to the Rockies in a few weeks
As mentioned I have 28c road tires on the ICAN wheelset and I also use a shallower alloy wheelset that I have gravel tires mounted.

Previous weight was with the Clement 40c tires.  With the 28c tires it weighs an even 19lbs including pedals and bottle cages. 20180424_061441_41799066635_o.jpg  With Mercury alloy wheels and Schwalbe 35c gravel tires20180628_125506_42168208555_o.jpg With the ICAN carbon wheels and Vittoria 28c road tires20180628_125506_42168208555_o.jpg  20180628_125543_42168209675_o.jpg  20180628_125548_41262151750_o.jpg  20180628_125556_42168211735_o.jpg  20180628_125600_43022476922_o.jpg  20180628_125626_29200688598_o.jpg  20180628_125728_43073512551_o.jpg I've put 40c tires on but I bet you could go bigger,  There is tons of clearance.

sissypants: I tried to measure the thread pitch to buy an axle for my trainer but got it wrong.  I would ask ICAN.  I didn't measure the brake hose before install but I just estimated now and I would guess >60 inches.

0
sissypants

Starter
Registered:
Posts: 2
Reply with quote  #7 
That's awesome!  I love build, the paint scheme, the two wheelsets that complement each other nicely, and the overall looks of the bike.  Maybe the head tube area looks a little awkward, but I'm sure I can get over that.

Glad to hear its been riding well for you.  Shoe strikes always happen.  Part of it is just how you fit into the pedals and keeping consistent form.  I'm also super stoked to see all that tire clearance, I'm definitely looking forward to running 27.5x2.35 tires this winter.  I'll be running Maxxis Rambler 700Cx38 for now though.  We tend to have pretty loose gravel on the roads where I ride (west Michigan).

I have been disappointed how my paint scheme turned out. The colors aren't the way it looked on the screen, and a gradient I ordered for the top of the top tube came out pretty abrupt, not gradual. Future note to self is pick an amazing color and just do a solid-color paint job. Should be shipping shortly, though.
0
Previous Topic | Next Topic
Print
Reply

Quick Navigation:

Easily create a Forum Website with Website Toolbox.